Configuring Lan Internet Access Service (On The Onu) - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End

11.3.1.6 Configuring LAN Internet Access Service (On the ONU)

This topic describes how to configure the Internet access service through the Ethernet port by
the ONU. Specifically, configure service flows on the ONU and configure the upstream VLAN
to provide the service channel from the ONU to the user and set up the upstream channel from
the ONU to the OLT.
Context
In this example, the ONU is in version V800R310C00. For ONU in other versions,
configurations are slightly different. For details, see the corresponding Configuration Guide.
Issue 01 (2014-04-30)
user-vlan 1001 tag-transform translate-and-add inner-vlan 258 rx-cttr 6 tx-
cttr 6
Configure the channel for the VoIP service.
1.
Configure the service VLAN and add the upstream port to this VLAN.
Configure the SVLAN ID to 200 and VLAN type to smart VLAN. Add upstream port
0/19/0 to VLAN 200.
huawei(config)#vlan 200 smart
huawei(config)#port vlan 200 0/19 0
2.
Configure the corresponding traffic profile.
The 802.1p priority of the VoIP service is 5 and the traffic profile is unlimited. You
can run the display traffic table ip command to query the traffic profile in the system.
If the existing traffic profile does not meet data plan requirements, a new traffic profile
is required.
New traffic profile 9 is added. In the command execution, priority-policy is local-
setting, which indicates that service packets are scheduled by the priority specified in
the traffic profile.
huawei(config)#traffic table ip index 9 cir off priority 5 priority-policy
local-setting
3.
Configure service flows to receive and transparently transmits the VoIP service from
the ONU.
According to the data plan,
– For the OLT: The SVLAN ID is 200. The user-side VLAN ID of the OLT is the
same as the upstream VLAN ID of the ONU, that is, 200. The VoIP service uses
GEM port 13.
– For the ONU: The upstream VLAN ID is 200.
huawei(config)#service-port 201 vlan 200 gpon 0/2/1 ont 1 gemport 13 multi-
service
user-vlan 200 rx-cttr 9 tx-cttr 9
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
867

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents