Huawei SmartAX MA5603T Configuration Manual page 956

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Service
Type
Internet
access
service
VoIP
service
VoD
service
Multicast
service
NOTE
C-VLANs in the preceding table are defined for OLTs. That is, they are upstream VLANs or S-VLANs of ONUs.
Procedure
l
Issue 01 (2014-04-30)
VLAN Plan
S-VLAN ID: 100; S-
VLAN attribute:
stacking
C-VLAN ID: 1000-1016
S-VLAN ID: 200
C-VLAN ID: 200
S-VLAN ID: 300
Multicast VLAN ID:
1000
Multicast cascading port:
0/2/1
IGMP version: IGMPv3
IGMP mode: IGMP
proxy
Multicast IP address
range:
224.1.1.10-224.1.1.100
IP address of the
multicast server:
10.10.10.10/24
Configure a channel for the Internet access service.
1. Create an S-VLAN and add an upstream port to it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Remarks
Plan the Internet access service in per user per
service per VLAN (PUPSPV) mode and apply S-
VLAN+C-VLAN to differentiate users.
For details, see 11.2.3 Principle of Internet
Access Service Data Plan.
The voice over IP (VoIP) service is a carrier-
operating, closed service and primarily adopts only
S-VLAN tags, which are transparently transmitted
by OLTs.
For details, see 11.2.5 Principle of VoIP Service
Data Plan.
Plan the video on demand (VoD) service in per user
per VLAN (PUPV) mode if possible, as the VoD
service requires only a few VLAN resources.
The VoD service is a carrier-operating, closed
service and primarily adopts only S-VLAN tags,
which are transparently transmitted by OLTs.
For details, see 11.2.6 Principle of IPTV Service
Data Plan.
The multicast service is a carrier-operating, closed
service and primarily adopts only S-VLAN tags.
For details, see 11.2.6 Principle of IPTV Service
Data Plan.
931