Huawei SmartAX MA5603T Configuration Manual page 157

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Data to be saved includes database files and configuration files.
commands and functions of auto-save operations.
Table 1-44 Auto-save operations
l By default, the autosave interval function is disabled in the system. That is, the system does not
l When the autosave interval function is enabled, you still can manually save data.
l If data is saved frequently, the system will be affected. Therefore, it is suggested that you set the auto-
l Before upgrading the system, run the autosave intervaloff or autosave timeoff command to disable the
l Configure an auto-backup server.
An auto-backup server backs up data, configuration, and logs of a device to an external server.
After an auto-backup server is configured, you can configure the auto-backup function.
Issue 01 (2014-04-30)
Auto-save
Set the auto-save file type.
Save database files
automatically at the preset
time.
Save database files
automatically at an interval.
NOTE
automatically save data. Hence, you need to manually save data.
save interval to longer than 60 minutes. It is better to set the auto-save interval to equal to or longer than
one day.
auto-save function to prevent upgrade failure due to the conflict between upgrade and auto-save
operations.
NOTICE
After the system upgrade is complete, you must re-enable the auto-save function if the auto-save function
is required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
autosave type { all |
configuration | data }
autosave time
autosave interval
1 Commissioning
Table 1-44 lists the
Function
l data: Saves only
database files.
l configuration: Saves
only configuration files.
l all: Saves both database
files and configuration
files.
l The system saves data at
the preset time.
l By default, the system
automatically saves data
at 00:00:00 every day.
l The system
automatically saves data
at a preset interval.
l By default, the system
saves database files at an
interval of 30 minutes.
132