Configuration Example Of The Multicast Video Service (Dynamic Program Generation) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
quit
vlan 20 smart
igmp mode proxy
igmp uplink-port 0/19/0
igmp program add name program3 ip 224.1.1.3 sourceip 10.10.10.11
bandwidth 5000 log enable
igmp program add name program4 ip 224.1.1.4 sourceip 10.10.10.11
bandwidth 5000 log enable
btv
igmp profile add profile-name music
igmp profile profile-name music program-name program1 watch
igmp profile profile-name music program-name program2 watch
igmp profile profile-name music program-name program3 watch
igmp profile add profile-name movie
igmp profile profile-name movie program-name program4 watch
quit
interface vdsl 0/2
deactivate 1
activate 1 template-index 1
alarm-config 1 1
quit
interface vdsl 0/4
deactivate 1
activate 1 template-index 1
alarm-config 1 1
quit
port vlan 10 0/19 0
port vlan 20 0/19 0
service-port 100 vlan 10 vdsl mode ptm 0/2/1 rx-cttr 2 tx-cttr 2
service-port 101 vlan 20 vdsl mode ptm 0/4/1 rx-cttr 2 tx-cttr 2
btv
igmp user add service-port 100 auth log enable max-bandwidth 10240
igmp user add service-port 101 auth log enable max-bandwidth 5120
igmp user bind-profile service-port 100 profile-name music
igmp user bind-profile service-port 101 profile-name movie
multicast-vlan 10
igmp multicast-vlan member service-port 100
multicast-vlan 20
igmp multicast-vlan member service-port 101
quit
save
3.2.2 Configuration Example of the Multicast Video Service
(Dynamic Program Generation)
Dynamic program generation simplifies multicast service configuration and reduces
maintenance cost, but does not support functions of program/user multicast bandwidth
management, program preview, and program prejoin. This configuration mode applies to
multicast services that do not have strict requirements on program and user management or to
those having programs and users managed on the upper-layer device.
Service Requirements
l
l
l
Figure 3-8
Issue 01 (2014-04-30)
ISP 1 and ISP 2 each have an address segment corresponding to multicast programs, which
do not require strict management and are dynamically updated according to the ordering
situation.
The service package purchased by user 1 allows user 1 to watch programs of ISP 1 only.
The service package purchased by user 2 allows user 2 to watch programs of ISP 2 only.
The ordering information about users can be recorded for monitoring and charging.
shows an example network of the multicast service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
297