Huawei SmartAX MA5603T Configuration Manual page 257

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Issue 01 (2014-04-30)
Parameter Code
42
43
44
45
46
47
48
49
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameter Name
Acct-Input-Octets
Acct-Output-Octets
Acct-Session-Id
Acct-Authentic
Acct-Session-Time
Acct-Input-Packets
Acct-Output-Packets
Terminate-Cause
2 Basic Configurations
Description
Indicates the number of upstream
bytes in the unit of byte, kbyte,
Mbyte, or Gbyte. The specific
unit can be configured using
commands.
Indicates the number of
downstream bytes in the unit of
byte, kbyte, Mbyte, or Gbyte.
The specific unit can be
configured using commands.
Indicates the charging
connection number. The
connection numbers for the
charging start packet, real-time
charging packet, and charging
stop packet of the same
connection must be the same.
Indicates the user authentication
mode.
l 1: RADIUS authentication
l 2: local authentication
Indicates the time for a user to go
online in the unit of second.
Indicates the number of upstream
packets.
Indicates the number of
downstream packets.
Indicates the user connection
interruption cause. The valid
values are as follows:
l User-Request(1): The user
actively goes offline.
l Lost Carrier(2): The
handshake fails, such as the
EAPOL detection fails.
l User Error(17): The user
authentication fails or times
out.
232