Synchronization; Figure 9: Equipment Identification Configuration Section - GE RPV311 Technical Manual

Chapter 4 – Configuration
2.2

Synchronization

2.2.1 Time Source
48

Figure 9: Equipment identification configuration section

A The I text field allows user to enter an equipment code (maximum 12
DENTIFIER
characters).
B The L text field allows user to enter a substation code (maximum 12
OCATION
alphanumeric characters, _ , − , 0 , 0-9 , a-z , A-Z)
C The O text field allows user to enter the name of the company which
WNER
purchased the equipment (maximum 12 characters).
If the IRIG-B signal has the CF extensions (IEEE1344), timing information as date, hour,
year, time zone and daylight saving time can be provided by the signal. Time zone
and daylight saving time information can also be manually set via the Web Interface,
overriding the information of the IRIG-B signal.
On the screen T
IME SOURCE
time zone of the IRIGB signal and also the IP address of the NTPv2, 3 or 4 server.
The configurable settings are:
A The T defines if time zone information is supplied by the IEEE1344
IMEZONE
extensions of the IRIG-B signal, or if it is manually set. This option will allow the
it is possible to configure how the RPV311 will interpret the
RPV311
RPV311-TM-EN-7