Figure 84: Filter Parameters - GE RPV311 Technical Manual

RPV311
1.5.4 Additional Tools
RPV311-TM-EN-7

Figure 84: Filter parameters

Transmission of the Configuration

Transmitting the configuration
To transmit the configuration to the RPV access C
will open for user to enter the RPV IP address, and then click on the <O
confirm.

Saving changes in the configuration file
To save changes in the configuration file, access F
The user is recommended to save files received of the RPV with name different of
that of the temp.cfg that is saved when creating a new configuration.
Setting the Colors
To set the colors used on the GOOSE Configurator, access T
C . The colors may indicate:
THE OLORS

Currently selected item;

Existence of link between SCL and the setting;

Bit set to an unknown SCL file;

Item that must be selected or not;

Line that contains the original SCL filename
Chapter 12 – RPV Tools
> T
OMMUNICATION RANSMIT
> button to
K
> S C
ILE AVE THE ONFIGURATION
> S
OOLS
. A window
.
ETTING
185