Communication Configuration; Auto Upload - GE RPV311 Technical Manual

Chapter 14 – Communications
6.3

Communication Configuration

6.4

Auto Upload

RPV311-TM-EN-7
It is possible to configure the communication ports (Ethernet, Gateway and Modem)
of the RPV311 in the Web Interface. For communication configuration details, refer to
Chapter 4: Configuration.
When any new record is generated, it can be transmitted to up to two different
servers automatically. When using the configuration interface, each destination IP
address should be entered, along with the designated record type.
If at the upload time the server is not available or the network is unreadable, the
record will not be transmitted. Within such case, it is always advisable to use the
application Scanner or the RPV Manager to
For further Scanner application information see Chapter 12: Software – RPV Tools.
For further RPV Manager application information seeChapter 13: Software – RPV
Manager.
For auto upload configuration details, see Chapter 4: Configuration.
RPV311
213