Standards Compliance; Emc Compliance; Product Safety: 2006/95/Ec; R&Tte Compliance - GE RPV311 Technical Manual

RPV311
5

Standards Compliance

5.1

EMC Compliance:

5.2

Product Safety: 2006/95/EC

5.3 R&TTE Compliance
34
Compliance with the European Commission Directive on EMC and LVD is
demonstrated using a Technical File.
Compliance with IEC 60255-26:2013 was used to establish conformity.
Compliance with IEC 61010-1:2010 was used to establish conformity.
Protective Class
Protective Class 1. This equipment requires a protective conductor (earth) to ensure
user safety.
Installation category
IEC61010-1:2010 Overvoltage Category II.
Environment
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-14, IEC 60255-21-1, IEC
60255-21-2. The equipment shall always be installed in a specific cabinet or housing
which will enable it to meet the requirements of IEC 60529 with the classification of
degree of protection IP54 or above.
Radio and Telecommunications Terminal Equipment (R&TTE) directive 99/5/EC.
Conformity is demonstrated by compliance to both the EMC directive and the Low
Voltage directive, to zero volts.
Before decommissioning, completely isolate the
equipment power supplies (both poles of any dc
supply). The auxiliary supply input may have
capacitors in parallel, which may still be charged. To
avoid electric shock, discharge the capacitors using
the external terminals before decommissioning.
Avoid incineration or disposal to water courses.
Dispose of the equipment in a safe, responsible and
environmentally friendly manner, and if applicable, in
accordance with country-specific regulations.
Chapter 2 – Safety Information
RPV311-TM-EN-7