GE RPV311 Technical Manual page 292

Appendix A – Equipment Log
RPV311-TM-EN-7
Traveling wave recording
614 finished [at: ]
Traveling wave recording
refused (equipment
619
unsync) [at: ]
Traveling wave recorder
Ethernet cross-trigger
630
started [at: ; identifier: ;
location: ; owner: ]
Traveling wave recorder
Ethernet cross-trigger
631
finished [at: ; identifier: ;
location: ; owner: ]
Traveling wave recorder
Ethernet cross-trigger
632
timed-out [at: ; identifier: ;
location: ; owner: ]
Start of traveling wave
recorder Ethernet cross-
633 trigger ignored [at: ;
identifier: ; location: ;
owner: ]
End of traveling wave
recorder Ethernet cross-
634 trigger ignored [at: ;
identifier: ; location: ;
owner: ]
Traveling wave record
650 available [name: ; trigger:
; cause ; duration: ]
Fault recorder threshold
exceeded [at: ; threshold:
700
]
Fault recorder threshold
701 no longer exceeded [at: ;
threshold: ]
Maximum fault recorder
702 threshold time exceeded
[at: ; threshold]
RPV311
End of traveling wave
recording threshold
exceeded
Trigger rejected due to
excess consecutive
triggering protection
enabled
Start of traveling wave
recorder Ethernet cross-
trigger detection
End of traveling wave
recorder Ethernet cross-
trigger detection
Traveling wave recorder
Ethernet crosstrigger
exceeded the maximum
preset recording time
Traveling wave recorder
Ethernet crosstrigger
ignored due to another
cross-trigger being
recorded by equipment
Ignored traveling wave
recorder Ethernet cross-
trigger finished
Indicates the traveling
wave record creation
Fault recorder preset
threshold exceeded
Return to normal level for
the fault recorder
Indicates the maximum
fault recorder threshold
time was exceeded
292