Asynchronous Oscillation - Siemens sinumerik 840d Programming Manual

Oscillation
11

11.1 Asynchronous oscillation

840D 840D
NCU 571 NCU 572
NCU 573
11.1 Asynchronous oscillation
Explanation of the commands
OSP1[axis]=
OSP2[axis]=
OST1[axis]=
OST2[axis]=
FA[axis]=
OSCTRL[axis]=
OSNSC[axis]=
OSE[axis]=
OS[axis]=
Function
An oscillating axis travels back and forth between
two reversal points 1 and 2 at a defined feedrate,
until the oscillating motion is deactivated.
Other axes can be interpolated as desired during the
oscillating motion.
A path movement or a positioning axis can be used
to achieve a constant infeed, however, there is no
relationship between the oscillating movement and
the infeed movement.
11-396
FM-NC 810D 840Di
Position of reversal point 1
Position of reversal point 2
Stopping time at reversal points in seconds
Feed for oscillating axis
(Set, reset options)
Number of spark-out strokes
End position
1 = activate oscillation; 0 = deactivate oscillation
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
08.97
11
 Siemens AG 2000. All rights reserved