Automatic Activation Of Guds And Macs (Sw 4.4 And Higher) - Siemens sinumerik 840d Programming Manual

08.97
3

3.6 Automatic activation of GUDs and MACs (SW 4.4 and higher)

840D 840D
NCU 571 NCU 572
NCU 573
3.6

Automatic activation of GUDs and MACs (SW 4.4 and higher)

Function
The definition files for GUD and macro definitions
are edited
• in the Services operating area for the MMC
102/103.
If a definition file is edited in the NC, when exiting the
Editor you are prompted whether the definitions are
to be set active.
Example:
"Do you want to activate the definitions from file
GUD7.DEF?"
Æ
"OK" Then a prompt is displayed whether the
currently active data are to be saved.
"Do you want to save the previous data
in the definitions?"
Æ
"OK"
"Cancel"
"Cancel"
Unload
If a definition file is unloaded, the associated data
block is deleted after a query is displayed.
Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
FM-NC 810D 840Di
The GUD blocks of the definition file
to be edited are saved, the new
definitions are activated and the
saved data are imported again.
Æ
The new definitions are activated,
the old data cleared.
Æ
The changes in the definition file
are discarded, the associated data
block is not changed.
File and Program Management
3
3-137