support with hook-and-loop fastener strips.
4.
Place the crossbar cables connected to the 1L and 1R ports of each XBU
together at the right side as viewed from the rear of the rack.
5.
If a cable holder is supplied with the rack used, secure the crossbar cables
placed together at the right side to the cable holder of the rack.
Figure 5-17 Example of stored cables (3BB configuration)
BB#02
BB#01
BB#00
Fujitsu M10/SPARC M10 Systems Installation Guide ・ July 2015
176
2L/2R
1L/1R
2L/2R
0L/0R
1L/1R
1L/1R
0L/0R