Mitsubishi Electric GOT2000 Series User Manual page 91

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

■2. Part names and settings
No.
1)
Display section
2)
Touch panel
3)
POWER LED
4)
Unit installation fitting
5)
S.MODE switch
6)
SD card access LED
7)
SD card interface
8)
SD card cover
9)
USB interface (Host)
10)
USB interface (Device)
11)
Cable clamp mounting hole
Terminating resistor setting switch
12)
(inside the cover)
13)
Battery
14)
Vertical installation mark
15)
Power terminal
16)
Ethernet interface
17)
RS-232 interface
18)
RS-422/485 interface
Name
Displays the utility and the user-created screen.
For operating the touch switches in the utility and the user-created screen
Lit in blue
Lit in orange
Blinks in orange and blue: Backlight failure
Not lit
Mounting fixtures for fixing the GOT to the control panel
Used for OS installation at the GOT startup
ON: SD card installed
Blink: SD card accessed
OFF: SD card not installed or SD card installed but removal possible
For installing an SD card
Has the function to switch the access to the SD card between enabled and
disabled states.
When the cover is opened: Access prohibited
When the cover is closed: Access allowed
For connecting a USB mouse and a USB keyboard, transferring data, and storing
data (Connector shape; TYPE-A)
For connecting a personal computer (Connector shape: Mini-B)
Cable clamp mounting hole as a precaution against a disconnection of the USB
cable (Recommended product: RSG-130-V0 of KITAGAWA INDUSTRIES
CO.,LTD.)
Switches the terminating resistor for the RS-422/485 communication port between
used and unused states (initial setting (unused))
Space for housing the battery
When using the GOT with the vertical display, install the GOT so that the arrow
points upward.
Power input terminal, LG terminal, FG terminal
For communicating with a controller or connecting a personal computer
(Connector shape: RJ-45 (modular jack))
For communication with a controller (Connector shape: D-sub 9-pin (male))
For communication with a controller (Connector shape: D-sub 9-pin (female))
Description
: Power is properly supplied.
: Screen saving
: Power is not supplied.
4 - 7
4.2 GT23
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents