Mitsubishi Electric GOT2000 Series User Manual page 139

Step 5.
After installing the battery to the battery holder of the GOT, close the battery cover until it clicks.
Step 6.
Turn on the GOT.
Step 7.
Check that the battery condition is normal with the utility.
For the details of the battery condition display, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
■4. Installing the battery to GT2104-R
The following shows the battery installation procedure, taking GT2104-R as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
Open the battery cover as shown below.
GT2104-R
Step 3.
To replace the battery, remove the old battery, and then disconnect the connector.
➠
6.7.2 Removing the battery
Battery Battery cover
Connector
Battery cover
6.7 Installing and Removing the Battery
6
6 - 25