Mitsubishi Electric GOT2000 Series User Manual page 58

Item
RS-232
RS-422/485
Ethernet
USB (Host)
Built-in
interface
USB (Device)
SD card
Extension
interface
Auxiliary extension
interface
Side interface
Buzzer output
POWER LED
Productive structure
External dimensions
Panel cut dimensions
Weight (excluding a fitting)
Compatible software package
*1 As a characteristic of liquid crystal display panels, bright dots (always lit) and dark dots (never lit) may appear on the panel.
Since liquid crystal display panels comprise a great number of display elements, the appearance of bright and back dots cannot
be reduced to zero.
Individual differences in liquid crystal display panels may cause differences in color, uneven brightness and flickering.
Note that these phenomena are characteristics of liquid crystal display panels and it does not mean the products are defective or
damaged.
*2 Flickering may occur due to vibration, shock, or the display colors.
*3 When a stylus is used, the touch panel has a life of 100 thousand touches.
The stylus must satisfy the following specifications.
• Material: polycarbonate resin
•Tip radius: 0.8 mm or more
*4 To prevent the display section from burning in and lengthen the backlight life, enable the screen save function and turn off the
backlight.
*5 To conform to IP67, close the USB environmental protection cover by pushing the [PUSH] mark firmly. (To conform to IP2X, open
the USB environmental protection cover.)
Note that the structure does not guarantee protection in all users' environments.
The GOT may not be used in an environment where the GOT is exposed to oil or chemicals for a long time, or where oil mist fills
the air.
3 - 10
3.2 Performance Specifications
GT2710-STBA
GT2710-STBD
1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps
Connector shape: D-sub 9-pin (male)
1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps
Connector shape: D-sub 9-pin (female)
1 channel Data transfer method: 10BASE-T, 100BASE-TX
Connector shape: RJ-45 (modular jack)
2 channel (front face, rear face)
Maximum transfer rate: High-Speed 480 Mbps Connector shape: USB-A
1 channel (front face)
Maximum transfer rate: High-Speed 480 Mbps Connector shape: USB Mini-B
1 channel, SDHC compliant (maximum 32 GB)
For installing a communication unit or an option unit
For installing an option unit
For installing a communication unit
Single tone (tone and tone length adjustable)
2 colors (blue and orange)
Outside the enclosure: IP67
303 (11.93)(W) × 218(8.58) (H) × 52 (2.05)(D) mm(inch)
289(11.38) (W) × 200 (7.87)(H) mm(inch)
GT Works3 Version1.112S or later
Specifications
GT2710-VTBA
GT2710-VTBD
*5
Inside the enclosure: IP2X
2.1(4.6)kg(lb)
GT2710-VTWA
GT2710-VTWD
1 channel (rear face)
1 channel (rear face)