Installing Drive Enclosure - Fujitsu Eternus DX60 S2 User Manual

Chapter 3 Rack Installation

3.3 Installing Drive Enclosure

4-2
3.3 Installing Drive Enclosure
This section describes how to install a drive enclosure in a rack.
IMPORTANT
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Holding the tab on the front cover, attach the right side of the cover to the enclosure.
CAUTION
Do Not
CAUTION
• Do not uninstall the disks that are installed by default or move them
to any other slot.
Contact your sales representative or maintenance engineer if disks
that are installed by default need to be uninstalled or moved to
another slot.
A drive enclosure must be installed above a controller enclosure.
Copyright 2014 FUJITSU LIMITED
Do
• When attaching the right side of the front cover, support its
left side with your left hand, to prevent it from coming loose
and falling.
Tab
56
End of procedure
P3AM-5502-05ENZ0