Fujitsu Eternus DX60 S2 User Manual page 98

Chapter 5 Setup
5.1 Basic Setup
■ For FC
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
On the [Setup FC Host] screen, register the FC card WWN for the server being connected
to the ETERNUS DX Disk storage system.
When a FC switch is connected to the ETERNUS DX Disk storage
IMPORTANT
system, settings for FC switch and the server (FC host) must be
completed in advance.
(1)
Click the [Add] button on the [Setup FC Host] screen.
(2)
Specify a WWN, server name, and host response.
(3)
Specify the other necessary items, and click the [Add] button.
The target FC host is displayed in the "Registered FC Host List" field.
(4)
When adding another FC host, repeat
If another FC host does not need to be added, click the [Done] button.
(5)
Click the [Next>] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Copyright 2014 FUJITSU LIMITED
Step (2) and Step
98
(3).
Step 5 appears.
P3AM-5502-05ENZ0