Fujitsu Eternus DX60 S2 User Manual page 85

Chapter 5 Setup
5.1 Basic Setup
2
2-1
2-2
3
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Set Date and Time
Set the date and time of the internal clock of the ETERNUS DX Disk storage system.
Specify the required items and click the [Next>] button.
A confirmation screen appears.
Click the [OK] button.
The date and time setting is set, and the [Set Storage System Name] screen appears.
Set Storage System Name
Set the name of the ETERNUS DX Disk storage system.
The information that is set here is used for network management by
SNMP. The name of the ETERNUS DX Disk storage system is
displayed in the logon and operation screens of ETERNUS Web
GUI.
Copyright 2014 FUJITSU LIMITED
85
P3AM-5502-05ENZ0