Initial Setup - Fujitsu Eternus DX60 S2 User Manual

Chapter 5 Setup
5.1 Basic Setup
5.1.4

Initial Setup

Perform the settings that are required before the operation of the ETERNUS DX Disk storage
system is started in the initial setup of ETERNUS Web GUI.
Perform the settings in the following order.
• Set Date and Time
• Set Storage System Name
• Change Password
• Set Port Parameters
• Set Network Environment
The initial setup procedure is as follows. For details on the setting procedures, refer to
"ETERNUS Web GUI User's Guide".
Procedure
1
1-1
1-2
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Start the Initial Setup.
Click the [Initial Setup] menu on the [Easy Setup] tab.
The Start screen of the [Initial Setup] function appears.
Click the [Next>] button.
The [Set Date and Time] screen appears.
Copyright 2014 FUJITSU LIMITED
84
P3AM-5502-05ENZ0