Figure 5.2 The [Assign Hot Spare] Screen - Fujitsu Eternus DX60 S2 User Manual

Chapter 5 Setup
5.1 Basic Setup
2
3
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Select the hot spare type and the disk to be used as hot spare, and click the
[Assign] button.
The following is a setting example when "Global Hot Spare" is selected.
When selecting "Dedicated Hot Spare" as the hot spare type, "Select an existing RAID
Group" appears.
Figure 5.2 The [Assign Hot Spare] screen
A confirmation screen appears.
Click the [OK] button.
The hot spare is registered.
This ends the basic settings of the ETERNUS DX Disk storage system.
If further setup is necessary, refer to "ETERNUS Web GUI User's Guide".
Copyright 2014 FUJITSU LIMITED
106
End of procedure
P3AM-5502-05ENZ0