Fujitsu Eternus DX60 S2 User Manual page 114

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
3
■ When using SNMP v1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Setup SNMP Agent
Click [Setup SNMP Agent] under the [Network Settings] menu on the [Global Settings] tab
in the ETERNUS Web GUI screen.
The [Setup SNMP Agent] screen appears.
The displayed items in the [Setup SNMP Agent] screen vary according to the current
SNMPD setting (SNMP v1 or SNMP v2c/v3) in the ETERNUS DX Disk storage system.
For SNMP v1, refer to "When using SNMP v1" (page
For SNMP v2c/v3, refer to
(1)
Set basic interface for SNMP Agent
(1) Click the [Basic Interface] link on the left of the screen.
The basic interface setting screen appears.
(2) Select "Enable" for "SNMP Function" and then set the required items.
Select the LAN port that was set up in
(2)
Set community
(1) Click the [Community Name] link on the left of the screen.
The community setting screen appears.
Copyright 2014 FUJITSU LIMITED
"When using SNMP v2c/v3" (page
Step 1 for "LAN Port used for SNMP".
114
114).
117).
P3AM-5502-05ENZ0