Fujitsu Eternus DX60 S2 User Manual page 70

Chapter 4 Connecting Cables
4.3 Drive Enclosure Connection
IMPORTANT
Procedure
1
1-1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
• When connecting miniSAS cables, check the connector orientation and
then firmly push it all the way in.
When disconnecting miniSAS cables, use the pull-tab to extract the
connector.
Connect the DI (OUT) port at controller 0 (CM#0) of controller enclosure, to the
DI (IN) port at expander 0 (EXP#0) of the drive enclosure 1 with the miniSAS
cable.
Connect the plug to be connected to DI (OUT) port, to the DI (OUT) port of the
Controller 0 (CM#0).
Remove the port cover from the DI (OUT) port before inserting the plug.
Controller
enclosure
Copyright 2014 FUJITSU LIMITED
70
P3AM-5502-05ENZ0