Fujitsu Eternus DX60 S2 User Manual page 60

Chapter 3 Rack Installation
3.3 Installing Drive Enclosure
3
4
4-1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Fix the drive enclosure in the rack.
Use the two thumb screws at the front of the drive enclosure to fasten it in the rack.
Thumb screw
Attach the front cover.
Fit the front cover in the left end slot of the drive enclosure to attach.
Be careful so that the part of the front cover to be fit in the slot
IMPORTANT
does not touch the power switch (
Slot
Copyright 2014 FUJITSU LIMITED
(Rear rack pillars)
60
).
P3AM-5502-05ENZ0