Table of Contents
Advertisement
4
4-24 Performing Setup from the Control Panel
Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
PServer Setup
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup
Clear Frame Types
You can clear all frame types at once by choosing Exit IPX/SPX Setup, choosing
IPX/SPX Setup, and then choosing Clear Frame Types.
Service Setup options
PServer is a program in the ColorPASS software that can service the Novell Print
queues assigned to the Novell print servers you have set up for printing to the
ColorPASS. When you choose PServer Setup and enable PServer, you can set up NDS
(Novell Directory Services), Bindery Services, or both. NDS is used with NetWare;
Bindery Services are used with NetWare in bindery emulation mode.
LPD Setup options
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing. For more information, see
ColorPASS on TCP/IP networks"
PServer Setup options
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the ColorPASS.
Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery
Setup if your network uses NetWare in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS
after Bindery, you will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare servers in bindery
emulation, note that the ColorPASS cannot service NDS and bindery emulation
servers on the same NDS tree.
"Setting up the
on page 2-17.
Advertisement
Table of Contents
