Table of Contents
Advertisement
5
5-42 Setting up the ColorPASS from a Windows Computer
Color Setup
Color options can be set only from local Setup. If you do not have the ACI installed,
change the PCL options on the ColorPASS Control Panel as described in
"Color Setup
options"
on page 4-46. For more information on settings for color options, see the
Color Guide
and Appendix A of the
Printing
Guide.
The color job defaults can be overridden on a job-by-job basis.
• A user can specify a different setting at print time from the printer driver.
• An administrator or operator can specify a different setting from the job
management tools after the job has been sent to the ColorPASS.
In the following illustration, "Device name" represents the model of the copier
N
:
OTE
connected to the ColorPASS, which is
.
5000
Advertisement
Table of Contents
