Network Setup - Canon ColorPass-Z7400 Configuration Manual

5

5-7 Network Setup

Network Setup
Network Setup configures the ColorPASS to receive print jobs over the networks used
at your site. If the ColorPASS is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
You can view and specify the following network settings in Network Setup:
• Adapters and ports—view currently configured network adapters and port settings
• Protocols—including AppleTalk, IPX/SPX, and TCP/IP
• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),
Windows print sharing (SMB), SNMP, HTTP support (WWW), Internet Printing
Protocol (IPP) printing, Port 9100 printing, E-mail Service