Table of Contents
Advertisement
5
5-9 Network Setup
Protocols
You can change AppleTalk, IPX/SPX, and TCP/IP protocol settings for the
ColorPASS. It works in conjunction with the Windows XP Embedded Local Area
Connection Properties Control Panel. When you click the Modify or Advanced button
next to the setting, the system opens the Local Area Connection Properties Control
Panel, where you complete the settings.
By default, the AppleTalk, IPX/SPX, and TCP/IP protocols are installed and enabled.
To disable a protocol, use the Windows Local Area Connection Properties Control
Panel from the ACI, or perform the ColorPASS Setup from Command WorkStation
on a remote workstation.
Advertisement
Table of Contents
