System Configuration; Connecting To Fxcpu (Fx3U) - Mitsubishi Electric GOT 1000 Connection Manual

2.1 System Configuration

Select a system configuration suitable for the application.
2.1.1 Connecting to FXCPU (FX
1 System configuration and connection conditions
Connection conditions
Number of GOTs Distance
TCP: 4
100m or less
*1 Connect the GOT to the Ethernet module via a hub.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
*2 When connecting GT16 to an equipment that meets the 10BASE (-T/2/5) standard, use the switching hub and
operate in an environment where 10Mbps and 100Mbps can be mixed.
*3 Length between a hub and a node
2 - 2
2.1 System Configuration

2.1.1 Connecting to FXCPU (FX3U)

Conventions used in this section
Numbers (e.g. ) of
to the numbers (e.g.
Refer to the numbers for checking models and applications.
2
*3
S/S 0V X0 X2 X4 X6
L N 24V X1 X3 X5 X7
0 1 2 3
IN
4 5 6 7
POWER
RUN
BATT
ERROR
OUT
0 1 2 3
FX FX -16M
3U 3U
4 5 6 7
Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
R
System configuration and connection conditions correspond
) of System equipment.
)
3U
System configuration
Ethernet module
*1 3
Twisted pair cable
MAX100m
Communication driver
Ethernet(FX)
Hub
3
Twisted pair cable
MAX100m
*2
1