Mitsubishi Electric GOT 1000 Connection Manual page 39

(1) GT16
1 After powering up the GOT, touch [Main
Menu] [Comm. Setting] from the
Utility.
2 The [Comm. Setting] appears.
3 Touch [Assign Ethernet I/F].
4 The [Assign Ethernet I/F] appears.
5 Verify that the following communication
driver name is displayed in the box for
the Ethernet interface to be used.
• Communication driver: Ethernet (FX)
6 When the communication driver name is
not displayed normally, carry out the
following procedure again.
Section 2.2 Preparatory
Procedures for Monitoring
2.2 Preparatory Procedures for Monitoring
2.2.6 Checking if GOT recognizes controllers
1
2
2 - 17