Mitsubishi Electric GOT 1000 Connection Manual page 34

3 Ethernet settings
(1) Ethernet settings
Item
Host
N/W No.
PLC No.
*1
Type
IP address
Port No.
Communication
*1 Select [FX] for [Type].
For the applicable Ethernet module, refer to the following.
2 - 12
2.2 Preparatory Procedures for Monitoring
2.2.3 Setting communication interface (Communication settings)
The host station is displayed.
("*" is displayed for the host station.)
Set the network No. of the connected Ethernet module.
<Default: blank>
Set the station No. of the connected Ethernet module.
<Default: blank>
Set the type of the connected Ethernet module.
<FX (Fixed)>
Set the IP address of the connected Ethernet module.
<Default: blank>
Set the port No. of the connected Ethernet module.
<5551 (Fixed)>
TCP (Fixed)
Section 2.1 System Configuration
Examples of Ethernet settings
For examples of the Ethernet settings, refer to the following.
Section 2.3 Programmable Controller Settings
Description Range
-
1 to 239
1 to 64
FX (Fixed)
0.0.0.0 to 255.255.255.255
5551 (Fixed)
TCP (Fixed)