Rfid Connection - Mitsubishi Electric GOT1000 Series Handbook

4.7.8 RFID connection

System configuration
Target device
*1
<RFID reader/writer>
<RFID controller>
<IC
tag>
Precautions
Other precautions
RFID function setting on GT Designer2
Set the RFID function and system information with GT Designer2 before connecting a RFID controller.
Communication in multiple RFID readers/writers connection
When connecting multiple RFID readers/writers, some controllers may communicate with each RFID
reader/writer.
For communicating the RFID controller with the each RFID reader/writer, set an interlock so that the RFID
controller does not communicate with RFID readers/writers until the executing communication is
completed.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of RFID
connection
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
252
4.7 Other Devices
4.7.8 RFID connection
cable
RS-232
Created by the user
*1: For connectable RFID controllers and system equipment, refer to the following TECHNICAL BULLETIN.
List of valid devices applicable for GOT1000 series (GOT-A-0010)
Visit the MITSUBISHI ELECTRIC FA NETWORK SERVICE website (MELFANSweb) to refer to the
TECHNICAL BULLETIN.
http://wwwf2.mitsubishielectric.co.jp/melfansweb/english/index.html
Option unit
Not required
Built in GOT
GT16/GT15
Not required
Built in GOT
Chapter 48 in GOT1000 Series Connection Manual
(SH-080532ENG)
GOT
GT11