Toshiba Programmable Controller - Mitsubishi Electric GOT1000 Series Handbook

4.3.7 TOSHIBA programmable controller

For details of the system configuration, refer to "Connection type" in section 4.3.1.
Connectable GOT
Connectable models
Series
T2(PU224)
T2E
PROSEC
T2N
T series
T3
T3H
model 3000(S3)
V series model 2000(S2)
model 2000(S2T)
*1 Either RS-422 or RS-232 interface can be selected.
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
Precautions
Precautions on system
When connecting a GOT to the TOSHIBA programmable controller, set a terminating resistor for the
programmable controller.
The GOT has a built-in terminating resistor.
Related Manuals
• For details of system configuration and
connection cable
• For precautions and restrictions
• For outlined procedure and checking of TOSHIBA
programmable controller connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
* For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
Computer link connection
Model
RS-422
Connection type
GT115
GT115
GT115
RS-232
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
Chapter 16 in GOT1000 Series Connection Manual
(SH-080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 15 in Handy GOT User's Manual
(JY997D20101)
4.3 Third Party Programmable Controller
4.3.7 TOSHIBA programmable controller
Direct CPU connection
RS-422 RS-232
*1
*1
197
1
2
3
4
5
6
7