Siemens Programmable Controller - Mitsubishi Electric GOT1000 Series Handbook

4.3.17 SIEMENS programmable controller

For details of the system configuration, refer to "Connection type" in section 4.3.1.
Connectable GOT
Connectable models
Series
SIMATIC S7-200 series
SIMATIC S7-300 series
SIMATIC S7-400 series
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
RS-232 or RS-422 connections
GT105
RS-232 connection
GT10
GT1030
RS-422 connection
GT1020
Precautions
Other precautions
Alarm list display function (system alarm) for GOT
When a GOT is connected to the SIEMENS programmable controller, programmable controller errors
cannot be displayed with the alarm list display function (system alarm). (Check the errors with monitoring
the SIEMENS programmable controller with the GOT.)
At system start-up
(1) At power-on
Power on all the programmable controller CPU before powering on a GOT. When powering on the
programmable controller CPU after powering on a GOT, reboot the GOT.
(2) At power-off of other station programmable controller CPU
When any of the other programmable controller CPUs (that are not connected to HMI Adapter) is
powered off, a GOT stops monitoring.
When rebooting the GOT, the GOT can start monitoring. (Even though the programmable
controller is powered on again, the GOT does not restart monitoring.)
214
4.3 Third Party Programmable Controller
4.3.17 SIEMENS programmable controller
Computer link connection
RS-422
Connection type
GT115
GT115
GT115
GT105
GT1030-LBD2/GT1030-LBDW2, GT1020-LBD2/GT1020-LBDW2
GT1030-LBD/GT1030-LBDW, GT1020-LBD/GT1020-LBDW,
GT1020-LBL/GT1020-LBLW
(For GT1020-LBL/GT1020-LBLW, MELSEC-FXCPU connection is available only.)
RS-232 RS-422
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
-Q BD
Direct CPU connection
RS-232