1. CONNECTION CONFIGURATION
Precautions
Other precautions
For connecting the GOT to the multiple CPU system (Q00CPU, Q01CPU, Q02CPU, Q02HCPU,
Q06HCPU, Q12HCPU, and Q25HCPU), use CPUs with the function version B or later.
When connecting to motion controller CPU (Q series)
• For Q172CPU or Q173CPU
(1) Use the motion controller CPU with the following production numbers.
Q172CPU with K******* or later, Q173CPU with J******* or later
(2) For using the SV13, SV22, and SV43, use a motion controller with the following OS installed.
SW6RN-SV13Q
• For Q172CPUN or Q173CPUN
For using the SV13, SV22, and SV43, use a motion controller with the following OS installed.
SW6RN-SV13Q
When connecting GT16, GT15, GT11, and Handy GOT to motion controller CPU (Q series), CNC C70, or
CRnQ-700
Connect the GOT to motion controller CPU (Q series), CNC C70, or CRnQ-700 via the RS-232 interface
of the QCPU in the multiple CPU system.
When connecting GT SoftGOT1000 to CNC C70 or CRnQ-700
Connect GT SoftGOT1000 to CNC C70 or CRnQ-700 via the RS-232 or USB interfaces of the QCPU in
the multiple CPU system.
Related Manuals
• For details of system configuration and connection
cable
• For precautions and restrictions
• For outlined procedure and checking of direct
CPU connection
• For controllers that can be monitored by GOT and
accessible range
• For connection method with Handy GOT
• For connection method with GT SoftGOT1000
• For controllers that can be monitored by GT
SoftGOT1000 and accessible range
*
For restrictions and precautions on controllers connected to a GOT, refer to the manual for each controller.
: 00E or later, SW6RN-SV22Q
: 00H or later, SW6RN-SV22Q
: 00E or later, SW6RN-SV43Q
: 00H or later, SW6RN-SV43Q
Chapter 3 in GOT1000 Series Connection Manual (SH-
080532ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
Chapter 10 in Handy GOT User's Manual
(JY997D20101)
Chapter 2 in GT SoftGOT1000 Version2 Operating
Manual (SH-080602ENG)
Chapter 2 in GT Designer2 Version2 Screen Design
Manual (For GOT1000 Series) (SH-080530ENG)
4.1 MITSUBISHI Programmable Controller
4.1.4 Direct CPU connection
1
2
: 00B or later
: 00B or later
3
4
5
6
7
111