Rkc Temperature Controller - Mitsubishi Electric GOT1000 Series Handbook

4.6.8 RKC temperature controller

For details of the system configuration, refer to "Connection type" in section 4.6.1.
Connectable GOT
Connectable models
Series
H-PCP-J
SR Mini HG
Series
H-PCP-A, CH-PCP-B
SRZ series Z-TIO, Z-DIO
CB series
(Products specified
CB100/400/500
/700/900
for MODBUS
communication)
*1 When the RS-485 interface of the temperature controller is used, use the RS-232/RS-485 converter.
*2 Use Communication Extension Module (Z-COM).
*3 Use Communication Extension Module (Z-COM) according to the system configuration.
The GOT model to be used differs depending on the connection type.
Series
RS-232 or RS-422 connections
GT11 Bus connection
Handy GOT RS-232 or RS-422 connections
Precautions
Precautions on system
Clock setting of GOT
The temperature controller does not have the clock function. Even though [Adjust] or [Broadcast] is set for
the clock setting, the setting is invalid (not processed).
Precautions on setup
When using RS-422 conversion unit
Set [Communication Setting] in the utility so that the 5VDC power is supplied to the RS-422 conversion
unit via the RS-232 interface of the GOT.
Polar difference between GOT and RKC product
For signal names, poles A and B are reversed between a GOT and an RKC product.
240
4.6 Temperature Controller
4.6.8 RKC temperature controller
Model
RS-485
(2-wire
type)
(2-wire
type)
(2-wire
type)
Connection type
GT115
GT115
GT115
GT16/GT15
RS-422 RS-232
*2 *1
*3
*1
GOT model to be used
-Q BD
-Q BDQ, GT115 -Q BDA
HS-Q BD
GT11
RS-485 RS-422 RS-232
*2 *1
*1