Panasonic FP-D250 User Manual page 468

Code
Item
No.
c84 Laser Unit image side
to side
c85 Server connection port
number (1)
c86 Server connection port
number (2)
c87 Server time out setting
c88 - Not used
c89
c90 ADF(FA-A355)
detection timing
c91 ADF (FA-A355)
original lead edge
registration
c92 ADF (FA-A355)
original pick up
registration (Top feed)
c93 ADF (FA-A355)
original trail edge
c94 ADF (FA-A355)
magnification ratio
(Top feed)
c95 Laser power when
Digital QUANTUM
(QUARC) is switched
off (Factory use only)
c96 Grid voltage when
Digital QUANTUM
(QUARC) is switched
off (Factory use only)
c97 Bias voltage when
Digital QUANTUM
(QUARC) is switched
off (Factory use only)
5-30
Function
Laser write start 0.5 mm
position adjustment (–4 to +4)
(side to side adjustment) For FP-D450/D600
(–8 to +8)
Server connection port (0 to +255)
number =256 x Server
connction port
number(2) (F6-c86) +
Server connection port (0 to +255)
number(1) (F6-c85)
(Example)
port number 18021
F6-85=101
F6-86=70
256 x 70 + 101=18021
Adjustment of server 1 Sec.
time out setting (0 to 300)
Adjustment of ADF 0.1mm
image read start (–20 to +20)
position
Adjustment of original 0.2mm
detection timing (–99 to +99)
Adjustment for length of 0.4mm
the loop formed before (–99 to +99)
registration roller
Adjustment of original 0.2 mm
trail edge detection (–127 to +127)
Adjustment of ratio
when the scan is made (–9 to +9)
(+): Enlargement
(–): Reduction
Adjustment of laser (–99 to +99)
power at initial setting
Adjustment of grid 2.28V
voltage at initial setting (–99 to +87)
Adjustment of bias 2.28V
voltage at initial setting (–99 to +99)
Remarks
0.1%