Panasonic FP-D250 User Manual page 463

Code
Item
No.
c05 Copy paper registration
detecting timing
c06 Not used
c07 Registration void of
image
c08 Trail edge detection
timing of the original
image
c09 Trail edge detection
timing of the copy
image
c10 Service count constant
value 'a' (Copier)
c11 Service count constant
value 'b' (DD file print)
c12 Service count constant
value 'c' (Printer)
c13 Service count constant
value 'd' (DD file save/
retrieve)
c14 Service count constant
value 'e' (ADF)
c15 Service count constant
value 'f' (Scanner)
c16 Not used
c17 Grid standard voltage
(standard = –750V)
(Factory use only)
c18 Laser power
compensation
(Factory use only)
c19 Bias standard voltage
(standard = –550V)
(Factory use only)
c20 Not used
Function
After c04 is adjusted, 0.2625mm
delay time is adjusted (–30 to +20)
from timing roller clutch (+): Delayed
ON. (–): Advanced
After c05 is adjusted, 0.425mm
registration void should (0 to +99)
be adjusted.
0.5mm
(–9 to 0)
(+) Delayed
(–) Advanced
Adjustment of trail edge 0.425mm
void (–9 to +15)
(+) Decrease
(–) Increase
Adjustment of constant
value used in the service
counter in the F7-c20
Adjustment of constant
value used in the service
counter in the F7-c20
Adjustment of constant
value used in the service
counter in the F7-c20
Adjustment of constant
value used in the service
counter in the F7-c20
Adjustment of constant
value used in the service
counter in the F7-c20
Adjustment of constant
value used in the service
counter in the F7-c20
Adjustment of grid 2.28V
standard voltage. (–99 to +99)
Laser power (–99 to +99)
compensation
adjustment
Adjustment of bias 2.28 V
standard voltage (–99 to +99)
Remarks
5-25