Panasonic FP-D250 User Manual page 112

3) Removal of the dust collecting filter
7
4) Replacement of the discharge lamp.
8
3
4
5) Removal of the drum separation finger
9
3
2
4
5
A
6
6
(1)Remove the copier rear and right side
covers.
(2)Remove the dust collecting fan motor
block.
(3)Remove the dust collecting filter.
(1)Open the front door.
(2)Swing open the toner hopper 180°.
(3)Remove 1 screw.
(4)Disconnect the harness.
(5)Remove the lamp holder.
(6)Remove the discharge lamp (Filter and 3
screws).
(1)Remove the drum unit.
(2)Disconnect the sensor harness.
(3)Remove the touch ring.
(4)Side the sensor base to rear side then
put it down and pull out.
(5)Remove the sensor PCB from under side.
(6)Push the from under side and slide the
A
separation finger then remove it.
Note: Be careful when removing and
reinstalling the drum finger that the two
springs are not lost or damaged.
(7)Reassemble in reverse order.
3-39