NEC Univerge SV8100 Features And Specifications Manual page 554

Issue 1.0
Program
Program Name
Number
11-14-13 Service Code Setup (for Hotel) –
Check-Out
11-14-14 Service Code Setup (for Hotel) –
Room Status Change for Own
Extension
11-14-15 Service Code Setup (for Hotel) –
Room Status Change for Other
Extension
11-14-16 Service Code Setup (for Hotel) –
Room Status Output
11-14-17 Service Code Setup (for Hotel) –
Hotel Room Monitor
11-14-18 Service Code Setup (for Hotel) –
Set Hotel PMS Code Restriction
11-15-01 Service Code Setup,
Administrative (for Special
Access) – Remote Maintenance
11-15-02 Service Code Setup,
Administrative (for Special
Access) – ACD Access in Dial-In
Conversion Table
11-15-03 Service Code Setup,
Administrative (for Special
Access) – Backup Data Save
11-15-05 Service Code Setup,
Administrative (for Special
Access) – System Programming
Mode, Log-On
11-15-06 Service Code Setup,
Administrative (for Special
Access) – Wake on LAN to APSU
Unit
2 - 530
Description/Comments
Use to customize the check-out
Service Codes which are used with
the Hotel/Motel feature.
Use to customize the room status
change for own extension Service
Codes which are used with the
Hotel/Motel feature.
Use to customize the room status
change for other extension Service
Codes which are used with the
Hotel/Motel feature.
Use to customize the room status
output Service Codes which are
used with the Hotel/Motel feature.
Use to customize the hotel room
monitor Service Codes which are
used with the Hotel/Motel feature.
Use to customize the set hotel
PMS code restriction Service
Codes which are used with the
Hotel/Motel feature.
Use to customize the remote
maintenance Service Codes which
are used by the administrator in
the Hotel/Motel feature.
Use to customize the ACD access
in dial-in conversion table Service
Codes which are used by the
administrator in the Hotel/Motel
feature.
This service code is used for back
up the programmed data on the
SRAM and Call History to the
Flash ROM. While saving the
database, it may cause system
lock up.
Use to customize the system
programming mode, log-on
Service Codes which are used by
the administrator in the Hotel/Motel
feature.
Use to customize the wake on LAN
to APSU unit Service Codes.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 639)
MLT, SLT
(default = 640)
MLT, SLT
(default = 641)
MLT
(default = 642)
MLT, SLT
(default = 675)
MLT
(default = 666)
(default = 730)
(default = 760)
MLT
# #
(default = 9)
MLT
# #
(default = )
MLT
(default not assigned
Flexible System Numbering
Level
2 3