NEC Univerge SV8100 Features And Specifications Manual page 674

Issue 1.0
Program
Program Name
Number
44-02-03 Dial Analysis Table for ARS/
F-Route Access – Additional
Data
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-09 ARS/F-Route Table – Maximum
Digit
84-01-02 H.323 Trunk Basic Information
Setup – Number of G.711 audio
frames
84-01-03 H.323 Trunk Basic Information
Setup – G.711 VAD mode
84-01-04 H.323 Trunk Basic Information
Setup – G.711 Type
84-01-05 H.323 Trunk Basic Information
Setup – Number of G.729 audio
frames
84-01-06 H.323 Trunk Basic Information
Setup – G.729 VAD mode
84-01-07 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer (min)
84-01-08 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer
(average)
84-01-09 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer (max)
84-01-11 H.323 Trunk Basic Information
Setup – Number of G.723 audio
frames
2 - 650
Description/Comments
If a Service Type is selected in
Program 44-02-02, set the
additional data, if required, for the
Pre-Transaction Table for selecting
ARS/F-Route (24 digits max: 1~9, 0
#
, @). To enter a wild card/don't
care digit, press Line Key 1 to enter
an @.
Select the trunk group number to be
used for the outgoing ARS call.
Input the maximum number of digits
to send when using the F-Route.
Use to define the number of G.711
Audio Frames.
Use to define the G.711 VAD mode
for H.323.
Use to define the G.711 type for
H.323.
Use to define the number of G.729
audio frames for H.323.
Use to define the G.729 VAD mode
for H.323.
Use to define the G.729 jitter buffer
(minimum) for H.323.
Use to define the G.729 jitter buffer
(average) for H.323.
Use to define the G.729 jitter buffer
(maximum) for H.323.
Use to define the number of G.723
audio frames for H.323.
UNIVERGE SV8100
Assigned Data
1
1 = Delete Digit =
0~255 (255 : Delete All
Digits)
2 = 0~500
(0 = No Setting)
3 = Dial Extension
Analyze Table Number
= 0~4
(0 = No Setting)
(default = 0)
0~100, 255
0 = No Setting
255 = Extension Call
(default = 0)
0~24
(default = 0)
1~4
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0 = A-law
1 = u-law
(default = 1)
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0~270ms
(default = 30)
0~270ms
(default = 60)
0~270ms
(default = 120)
1~2
(default = 1)
IP Trunk – H.323
Level
2 3