NEC Univerge SV8100 Features And Specifications Manual page 334

Issue 1.0
Program
Program Name
Number
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E000 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
2 - 310
Description/Comments
Turns Off or On Ringdown Extension for
extensions with this COS.
Turns Off or On an extension allowing it
to force Handsfree Answerback or
Forced Intercom Ringing for outgoing
Intercom calls.
When an extension is set to ring mode
for ICM calls, enabling this option
prevents callers from changing the call
to voice announce mode.
Turns Off or On an extension ability to
use Department Group Step Calling.
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
Used to Enable or Disable Call Address
Information for each Class Of Service.
Turns Off (0) or On (1) a user Class of
Service from automatically blocking
outgoing Caller ID information when a
call is placed. If block is enabled, the
system automatically inserts the Caller
ID block code 1831 (defined in Program
14-01-21) before the user dialed digits
(this requires Program 14-02-10 to be
enabled). If block is disabled, the system
outdials the call just as it was dialed by
the user.
Turns Off or On an extension ability to
display the name and number of the
extension that dialed 000.
Turns Off or On an extension ability to
override the trunk access map
programming for outgoing calls.
Enable or Disable an extensions ability
to voice over to a busy virtual extension.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Cordless DECT Terminals (US Only)
Level
1 2 3