NEC Univerge SV8100 Features And Specifications Manual page 842

Issue 1.0
Status
Speaking
ICM Dial Tone or Busy Tone
Calling Another Extension
Receiving a Personal Park Recall
A user can display the Caller ID of a call in Park if Caller ID is enabled (1) in Program 20-09-
02.
Park keys can be assigned on DSS consoles.
Calls on virtual extension keys cannot be put in Personal Park if Program 15-18-01 is set to
Land on the key (1).
Function keys simplify Park operation.
Calls on Virtual Extension keys cannot be Call Parked.
One Touch keys programmed for Park Hold Service Code cannot be used to park calls
without using Hold or Transfer.
Call Park – Step Call is supported in the local system only.
A parked call cannot be retrieved from Hold Dial Tone (Second dial tone).
Default Setting
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
None
2 - 818
Using 3-Digit
Service Code
Not Available Not Available
Available Not Available
Not Available Available
(with outside call on hold
and when called extension
does not answer)
Not Available Not Available
UNIVERGE SV8100
Using 1-Digit Service
Code
Using
Personal Park
Key
Available
Available
Available
Available
Park