NEC Univerge SV8100 Features And Specifications Manual page 146

Issue 1.0
System Availability
Terminals
Not applicable
Required Component(s)
None
Related Features
Battery Backup – System Power
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
90-03-01 Save Data
Operation
None
2 - 122
Description/Comments
Use this program to save the
programmed data on the SRAM
and Flash ROM to the 16MB/32MB
ATA removable Compact Flash
memory card. This program should
be used after changing the
programmed data.
UNIVERGE SV8100
Assigned Data
Dial 1 + Press Hold
(default not assigned)
Battery Backup – System Memory
Level
1 2 3