NEC Univerge SV8100 Features And Specifications Manual page 844

Issue 1.0
Program
Program Name
Number
15-18-01 Virtual Extension Key Enhanced
Options – Virtual Extension Key
Operation Mode
15-18-02 Virtual Extension Key Enhanced
Options – Display Mode when
pacing a call on Virtual Extension
Key
20-06-01 Class of Service for Extensions
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-11-27 Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
24-01-02 System Options for Hold – Hold
Recall Callback Time
24-01-06 System Options for Hold – Park
Hold Time - Normal
24-01-07 System Options for Hold – Park
Hold Time - Extended (Recall)
2 - 820
Description/Comments
This program sets whether an
incoming call to a Virtual Extension/
CAR resides on the Virtual
Extension/CAR key once answered
(1) or appears on a CAP Key/CO
Appearance Line key (0). This
setting applies to Multiline
Terminals, single line telephones
and virtual extension numbers.
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of
the extension it resides on.
Assign a Class of Service (1~15) to
extensions.
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal, 1 = Extended).
Set the hold type when a trunk call
is put on hold by an extension.
Turns On or off an extensions
ability to transfer a parked call.
Use this option to Turns On (1) or
Off (0) using the Call Park
Automatically Search option.
A trunk recalling from Hold or Park
rings an extension for this time.
After this time the system invokes
the Hold recall time again. Cycling
between Hold recall time and
callback time and normal or
extended (Recall) Park Hold time
continues until a user answers the
call.
Set the Park Hold Time. A call left
parked longer than this time recalls
the extension that initially parked it.
Set the Extended Park Hold Time.
A call left parked longer than this
time recalls the extension that
initially parked it.
UNIVERGE SV8100
Assigned Data
0 = Release
1 = Land On the Key
(default = 0)
0 = Secondary Extension
Name
1 = Actual Station Name
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 90 seconds)
0~64800 (seconds)
(default = 300 seconds)
Level
1 2 3
Park