Reset Station Passcodes To Default - Samsung DCS Manual

If you have entered invalid data, you will receive an [INVALID ENTRY] message for three
seconds. Re-enter the correct date and time. If the information you entered is incorrect, repeat the
procedure.
3.3

RESET STATION PASSCODES TO DEFAULT

Individual keyset users can set or change their own individual passcodes. These passcodes are used to
lock and unlock keysets, override toll restriction and access the DISA feature. At times, it may be
necessary for the System Administrator to reset a station's passcode to default "1234." This program
cannot be used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
1 Press TRSF 101
Display shows
2. Dial the station (eg. : 205) OR use the
UP and DOWN keys to scroll through
the keyset numbers and press the RIGHT
soft key to move the cursor to the right
3. Press HOLD to reset passcode
4. Press the RIGHT soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPEAKER to
store and advance to the next program
Page 2
DISPLAY
[201] PASSCODE
PASSCODE : * * * *
[205] PASSCODE
PASSCODE : * * * *
[205] PASSCODE
PASSCODE : 1234