Samsung DCS Manual page 49

3.41 PROGRAMMING STATIONS TO PAGING ZONES
Allows the System Administrator to assign a keyset to any of the four internal paging zones and all call
page (page plus ∗). The total number of keysets that can receive a page is limited to 80. A keyset may
be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as "1" in a zone column, it
will receive pages for that zone. If the keyset is flagged as "0," it will not receive pages for that zone.
Keysets can receive pages for more than one zone or can be programmed not to receive an all call
page.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Press TRSF 604
Display shows
2. Enter index number (01–80, eg.,05)
via dial key pad OR press UP or
DOWN key to make selection and
press RIGHT soft key to move
cursor
3. Enter station number (eg., 205) via
dial key pad OR press UP or
DOWN key to make selection and
press RIGHT soft key to move
cursor
4. Move cursor under page zone
desired by pressing UP or
DOWN key and enter the digit 1
under zone and press RIGHT soft
key to return to step 2 to continue
with entries
5. Press TRSF to store and exit OR
press SPEAKER to store and
advance to next program
Page 40
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next program
Used to clear entry
DISPLAY
ENTRY:STN :1234∗
01:NONE: 00001
ENTRY:STN :1234*
05:NONE: 00001
ENTRY:STN :1234∗
05:205 : 00001
ENTRY:STN :1234∗
05:205 : 01001