Samsung DCS Manual page 8

INCOMING
Station users in the other system can access the tieline and make intercom calls to stations in your
system.
Answer tieline calls ringing at your station as you would any other outside call. They can be put on hold,
transferred and conferenced in the same manner as other outside calls.
IN AND OUT ON TIELINE
Users accessing the tieline from the other system can get a line in your system and make outgoing
calls. These calls can be controlled by assigning a dialling class to the tieline. For further information,
see your Samsung Communication Consultant.
1.15 ALARM SENSOR OPERATION
Your system may be equipped with an alarm sensor. When this sensor is activated, the designated
stations will ring and will display a related message.
To clear the alarm:
• Lift the handset and dial 57.
• Enter the alarm clear passcode (must be obtained from your service company).
• Replace the handset.
Page 5