Samsung DCS Manual page 36

ACTION
1. Press TRSF 119
Display shows
2. Display shows first station current display
mode enter Station number OR
Press UP or DOWN to scroll through and
press the RIGHT soft key to select a
station OR
press ANS/RLS to select ALL stations
3. Dial display option 0,1 or 2 OR press UP
or DOWN to select option and press the
RIGHT or LEFT soft key to return to step
2
4. Press TRSF to store and exit OR
press SPEAKER to store and advance to
next program
3.29 PROGRAMMING FEATURE PASSCODES
Allows the System Administrator to change the passcodes for several features. These features are the
following: DAY/NIGHT, DISA ALARM, ALARM CLR and AA RECORD.
NOTE: The passcode is four digits long. Each digit can be 0-9. The current (old) passcode is not
required for this program.
PROGRAM KEYS
KEYPAD
SPEAKER
ACTION
1. Press TRSF 202
Display shows
2. Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor to
passcode entry
3. Enter new passcode via digits from
dial key pad
OR
Press RIGHT soft key to return to step 2
Continue to change other passcodes
4. Press TRSF to store and exit OR
press SPEAKER to store and advance to
next program
Page 27
Used to enter passcodes
Save data and advance to next program
DISPLAY
[201] CLIP DISPLAY
NUMBER FIRST
[201] CLIP DISPLAY
NUMBER FIRST
[ALL] CLIP DISPLAY
?
[201] CLIP DISPLAY
NUMBER FIRST
DISPLAY
CHANGE PASSCODE
DAY/NIGHT : 0000
CHANGE PASSCODE
ALARM CLR : 8765
CHANGE PASSCODE
ALARM CLR : 9999