Samsung DCS Manual page 35

3.27 SETTING KEYSET RINGER VOLUME
Allows the System Administrator the ability to assign a system-wide level for each station ringer volume..
There are eight levels of volume; level 1 is the lowest and level 8 is the highest. For early versions of
software this feature is programmed using MMC 118; later versions use MMC 114.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ANS/RLS
ACTION
1. Press TRSF 118
Display shows
2. Dial station number (eg., 205) OR
Use UP and DOWN to select station
and use the RIGHT soft key to move the
cursor OR press ANS/RLS to select all
stations
3. Enter value 1-8 (eg., 5) OR press UP or
DOWN key to make selection and press
the RIGHT soft key to return to step 2
Note: you will hear a short burst of ring at
the selected value
3.28 PROGRAMMING CLIP PRESENTATION
This program allows the System Administrator to set what CLIP information will be displayed on an LCD
keyset. If CLIP name is chosen the details must be programmed in the CLIP translation table as per 3.18
above. The CLIP display options are as follows:
0 NO DISPLAY
1 NUMBER ONLY
2 NAME ONLY
PROGRAM KEYS
UP & DOWN
KEYPAD
SPEAKER
ANS/RLS
Page 26
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next program
Used to select ALL stations
No CLIP data will be displayed.
The CLIP number received from the central office
will be displayed first.
The CLIP name will be displayed first
Used to scroll through options
Used to enter selections
Save data and advance to next program
Used to select ALL stations
DISPLAY
[201] RING VOL.
RING VOLUME 1
[205] RING VOL.
RING VOLUME 1
[ALL] RING VOL.
RING VOLUME ?
[205] RING VOL.
RING VOLUME 5